Spatial filtering of a projection printer, using partially coherent light

Show full item record

Title: Spatial filtering of a projection printer, using partially coherent light
Author: Vlahakes, Leon
Abstract: This investigation applied the technique of spatial filtering to a projection printer utilizing partially coherent illumination. The affect of filtering on image quality parameters such as resolution, edge gradient and MTF were determined for a black and white film. Edge gradient analysis was used to derive MTF data from sampled edges. A source diameter of 3 mm and spatial filter diameters of .6, 2.2, and 3.0 mm were used. Spatial filtering was seen to have a drastic affect on edge gradient and MTF. Increasing the filter diameter resulted in a decrease of cutoff frequency of the system. Spatial filtering had the affect of boosting low frequency modulation by up to 30 percent. Subjectively, however, changes could not be detected, indicating that the alterations made to the system are not significant to be detected visually. Resolution was found to fluctuate only 15 percent between the application of each filter. Despite gross changes in other imaging characteristics, resolution remained nearly unchanged, indicating that resolution is a poor discriptor of image quality.
Record URI: http://hdl.handle.net/1850/8352
Date: 1980-05

Files in this item

Files Size Format View
LVlahakesThesis05-1980.pdf 5.009Mb PDF View/Open

The following license files are associated with this item:

This item appears in the following Collection(s)

Show full item record

Search RIT DML


Advanced Search

Browse